Polished plaster is a noble finishing material, they spoke of Polished plaster relatively recently, although they used the “Polished” for a very long time.
Polished plaster was invented in ancient Rome, and not in Venice, as is commonly believed. In general, the history of the appearance of Polished plaster is very banal. The main finishing material in ancient times was marble. He was ground, sawed, ground and polished. After working with marble, a large amount of waste remained, it was marble dust, crumbs and sand. All of this waste was mixed with slaked lime, and it was the connecting element for this material. The result was a mass that could be easily applied to the walls using it as a finishing material or as a basis for murals and art murals. And only then, after many years, she was reborn in Venice and received her “Polished” name “Polished plaster”. Various natural dyes began to be added to it to give color and variety. You can check this website and have the best time there.
Polished stucco in the living room interior
Subsequently, not only marble was used for the production of Polished plaster, but also: quartz, onyx, granite, limestone and many other stones.
Polished stucco ceiling in living room interior
The plaster itself, after polishing, becomes transparent, which allows for an indescribable play of light. Therefore, it is imperative that the preparation of the surface on which the Polished plaster is applied is carried out very high quality. Otherwise, all cracks and bumps on the surface to be trimmed will be visible.
The Polished plaster applied to the surface begins to absorb carbon from the air, as a result of which the process of carbonization occurs in it, that is, a solid carbon film forms, which provides unique performance characteristics.
The texture of the coating can be matched to any interior and furniture, this is completely your personal decision, you can create exactly the picture that you need in accordance with the general plan.
Polished stucco in the hallway interior
How to perform application work
It should be noted right away that the main difficulty in creating such a topcoat is the technology of its application. This process is complex, time-consuming and lengthy, but the final result depends on it. Consider the classic application of Polished plaster. With the correct execution of operations, after the end of all the work, you should have a result, of course there are an infinite number of shades and textures, but in the classic application it is as follows:
Take a small amount of Polished trowel on the edge of the trowel or putty knife (choose the tool that suits you best) and apply, starting from the corner. Distribute the material in small sections of 10-15 cm in random strokes, the strokes should go at different angles, the more chaotic, the better. The size of the strokes will be easy to hold because the width of the spatulas and trowels for applying this material varies just in sizes of 10-15 cm. Keep the trowel (trowel) tight at an angle of 10-15 degrees to the surface. Layers should be very thin (about 1-2 mm). After the first layer has completely dried, the surface is sanded and rubbed with a spatula. Do this carefully so as not to peel off the applied – just remove excess material from the surface.
